Crearea unui dictionar folosind HFST

From Apertium
Revision as of 16:48, 23 November 2011 by Cristipiticul (talk | contribs) (→‎Cases)
Jump to navigation Jump to search
Pentru mai multe informaţii despre instalarea formatului HFST, apăsaţi aici.

Această pagină vă va prezenta cum să creaţi un nou dicţionar folosind HFST. Se pot găsi şi referinţe foarte utile cu privire la formalismele lexc şi twol, precum FSMBook, dar majoritatea lor folosesc implementaţia Xerox, nu cea gratuită oferită de HFST.

Deşi formalismele actuale sunt mai mult sau mai puţin asemănătoare, comenzile folosite pentru compilarea lor nu sunt tot timpul aceleași. HFST este bazat pe compatibilitatea cu sistemele de operare Unix. Noi vom profita de acest avantaj. Deoarece la majoritatea limbilor indo-europene şi cele simpliste pot fi tratate cu uşurinţă de lttoolbox, noi vom încerca să abordăm o limbă care nu face parte din această familie, una care are o morfologie complexă şi nu poate fi tratată cu uşurinţă de lttoolbox.

Introducere

Un analizator morfologic HFST are două fişiere cu reguli, unul dintre ele este lexc. Acesta defineşte modul în care sunt formate cuvintele din morfeme. De exemplu, cuvântul lup + i devine lupi. Cel de-al doilea fişier poate fi unul twol (two-level rules) sau unul xfst (reguli de rescriere secvenţiale). Acestea prezintă ce se întâmplă când morfemele formează cuvântul. Ca exemplu poate fi folosit lup<n><pl>lup + i.

Noi vom lucra pe această pagină cu tipul twol, cel cu reguli pe două nivele. Dacă sunteţi interesat de xfst, puteţi găsi un tutorial pe [Foma această pagină].

În următoarele secţiuni vom începe cu vocabularul (fişierul lexc), iar apoi vom trece la fişierul twol.

Mai întâi este necesar să compilaţi HFST3.

Limba

Limba pe care o vom folosi este cea vorbită în Turkmenistan, o limbă derivată din cea turcă. Vom lucra pe perechea de limbi turcă-turkmenistană. Vom încerca să schimbăm numărul şi cazul substantivelor. Substantivul în turkmenistană poate avea şase cazuri, 2 genuri şi posesiv. Sufixele pot avea forme diferite în funcţie de sfârşitul cuvântului de bază: dacă e vocală sau consoană.

Armonia vocalică

Simplificând mult, deoarece [1], se poate spune că în limba turkmenistană cuvintele de bază pot fi de două tipuri: care conţin vocale superioare sau conţin [vocale anterioare]. De exemplu mugallym "profesor" are doar vocale anterioare, iar kädi "dovleac" are doar vocale posterioare. Vocalele anterioare sunt: a, y, o, şi u. Cele posterioare sunt: ä, e, i, ö, şi ü.

Deci, când adăugam unui cuvânt de bază un sufix, trebuie să ştim ce tip de vocale conţine cuvântul pentru a alege vocala potrivită pentru sufix.

Numărul

Numărul în turkmenistană poate să fie singular (în cazurile în care nu prezintă sufix) sau plural, unde sufixul este -lar sau -ler. Primul este folosit pentru cuvintele cu vocale anterioare, iar cel de-al doilea este folosit pentru cuvintele cu vocale posterioare.

Cazurile

Noi am folosit o metodă compactă pentru a prezenta sufixele pentru cazuri. Între { şi } se află vocalele care pot fi folosite în sufixe, iar între ( şi ) sunt sunete adăugate.

Caz Sufix Utilizare Exemple
V C V C
Nominativ Subiectul propoziţiei pagta gazan
Genitiv -n{y,i,u,ü}ň -{y,i,u,ü}ň Arată posesiunea pagtanyň gazanyň
Dativ -{a,ä} , -n{a,e} -{a,e} Complement indirect pagta gazana
Acuzativ -n{y,i} -{y,i} Complement direct pagtany gazany
Inesiv -(n)d{a,e} -d{a,e} Timp/loc pagtada gazanda
Instrumental -(n)d{a,e}n -d{a,e}n Prin intermediul acestuia subiectul face acţiunea pagtadan gazandan

Full paradigm

Note: This does not include the possessive.

maşgala "family"
Case Singular Plural
Nominative maşgala maşgalalar
Genitive maşgalanyň maşgalalaryň
Dative maşgala maşgalalara
Accusative maşgalany maşgalalary
Inessive maşgalada maşgalalarda
Instrumental maşgaladan maşgalalardan
esger "soldier"
Case Singular Plural
Nominative esger esgerler
Genitive esgeriň esgerleriň
Dative esgere esgerlere
Accusative esgeri esgerleri
Inessive esgerde esgerlerde
Instrumental esgerden esgerlerden

Lexicon

So, after going through the little description above, let's start with the lexicon. The file we're going to make is called apertium-tr-tk.tk.lexc, and it will contain the lexicon of the transducer. So open up your text editor.

The basics

The first thing we need to define are the tags that we want to produce. In lttoolbox, this is done through the <sdefs> section of the .dix file.

Multichar_Symbols

%<n%>   ! Noun
%<nom%> ! Nominative
%<pl%>  ! Plural

The symbols < and > are reserved in lexc, so we need to escape them with %

We also need to define a Root lexicon, which is going to point to a list of stems in the lexicon NounStems. The Root lexicon is analagous to the <section id="main" type="standard"> in lttoolbox:


LEXICON Root

NounStems ;

Now let's add our two words:

LEXICON NounStems

maşgala Ninfl ; ! "family"
esger Ninfl ;   ! "soldier"

First we put the stem, then we put the paradigm (or continuation class) that it belongs to, in this case Ninfl, and finally, in a comment (the comment symbol is !) we put the translation.

And define the most basic of inflection, that is, tagging the bare stem with <n> to indicate a noun:

LEXICON Ninfl

%<n%>: # ;

This LEXICON should go before the NounStems lexicon. The # symbol is the end-of-word boundary. It is very important to have this, as it tells the transducer where to stop.

Compiling

So, now we've got our basic lexicon, let's compile it and test it. We compile with hfst-lexc:

$ hfst-lexc apertium-tr-tk.tk.lexc > tk-tr.lexc.hfst

And we can test it both with hfst-fst2strings:

$ hfst-fst2strings tk-tr.lexc.hfst 
maşgala<n>:maşgala
esger<n>:esger

Continuation lexica

So, we've managed to describe that maşgala and esger are nouns, but what about the inflection. This is where continuation lexica come in. These are like paradigms in lttoolbox.

The basic morphotactics of the Turkmen noun is:

stem plural? possessive? case copula?

Where ? denotes optionality. We're just working with number and case here, so let's describe the inflection, first we can start with number. In the section of the file LEXICON Ninfl, add the following line:

%<n%>%<pl%>:%>l%{A%}r # ;

Phew, that looks pretty complicated!! Well, perhaps, but each part has it's reason, let's describe them:

Part Description
%<n%>%<pl%> The part on the left side defines the analysis, in this case noun, plural. Note, this is in contrast to lttoolbox, where the analysis is usually on the right side.
: The symbol : delimits the left and right sides (or surface side, and lexical side)
%>%>l%{A%}r This is the surface form, which is split into:
    %> The morpheme boundary delimiter (we'll talk about this later, but you put it in between morphemes where changes might happen.
    l%{A%}r The surface morpheme, in this case -lar or -ler
    %{A%} An "archivowel"... a placeholder for a vowel that can be either a or e
# The end of word boundary
; End of line

Part of the reason it looks complicated is all of the % symbols. If we remove them it looks far more readable:

<n><pl>:>l{A}r # ;

(You need to have them though)

For comparison, in lttoolbox (using · for morpheme boundary and for the {A}) for , this would look something like:

<e><p><l>·l<s n="A"/>r</l><r><s n="n"/><s n="pl"/></e>

So, we've added the first of our inflections, the plural. We need to do two things before we can test it. First we need to add %{A%} to the Multichar_Symbols section of the file, so scroll to the top and add it, you should get something like:

Multichar_Symbols

%<n%>   ! Noun
%<nom%> ! Nominative
%<pl%>  ! Plural

%{A%}   ! Archivowel 'a' or 'e'

Now save the file. The next thing we need to do is compile again:

$ hfst-lexc apertium-tr-tk.tk.lexc > tk-tr.lexc.hfst

And then we can test:

$ hfst-fst2strings tk-tr.lexc.hfst 
maşgala<n><pl>:maşgala>l{A}r
maşgala<n>:maşgala
esger<n><pl>:esger>l{A}r
esger<n>:esger

Ok, so this is cool, but it also kind of sucks, these aren't real surface forms. We'll never see esger>l{A}r in any text. The surface form we're looking for is esgerler. So how do we get that ?

Enter twol

The idea of twol is to take the surface forms produced by lexc and apply rules to them to change them into real surface forms. So, this is where we change -l{A}r into -lar or -ler.

What we basically want to say is "if the stem contains front vowels, then we want the front vowel alternation, if it contains back vowels then we want the back vowel alternation". And at the same time, remove the morpheme boundary. So let's give it a shot.

We're going to make a new file apertium-tr-tk.tk.twol.

First we need to define the alphabet:

Alphabet
 A B Ç D E Ä F G H I J Ž K L M N Ň O Ö P R S Ş T U Ü W Y Ý Z
 a b ç d e ä f g h i j ž k l m n ň o ö p r s ş t u ü w y ý z
 %{A%}:a ;

You don't have to define the upper and lower case on separate lines, but it can help make it clearer.

We also want to define at this point, that whatever happens, we want to remove the morpheme boundaries %> from the surface forms, so add the following line just below the last line of lower case letters, and before the ;:

 %>:0 

Here, the left side is the morphotactic form, and the right side is the surface form. Doing %>:0 changes %> into 0, which is the same as deleting it. The 0 symbol is not output.

So, the final alphabet section will look like this:

Alphabet
 A B Ç D E Ä F G H I J Ž K L M N Ň O Ö P R S Ş T U Ü W Y Ý Z
 a b ç d e ä f g h i j ž k l m n ň o ö p r s ş t u ü w y ý z
 %{A%}:a %>:0  ;

Next we need to define some "sets" to work with, these are basically for giving mnemonics to features, like "front vowel" and "back vowel" which we want to refer to later in the rules:

Sets

Consonant = B Ç D F G H J Ž K L M N Ň P R S Ş T W Z
            b ç d f g h j ž k l m n ň p r s ş t w z ; 
Vowel =     A E Ä I O Ö U Ü Y Ý 
            a e ä i o ö u ü y ý ;
FrontVowel = Ä E I Ö Ü ä e i ö ü ;  
BackVowel = A Y O U a y o u ;
NonBack = Consonant FrontVowel %> ;
NonFront = Consonant BackVowel %> ; 

So now we've got everything set up, to add the rule, there is a new section, Rules:

Rules
  
"Front harmony in suffixes"
%{A%}:e <=> FrontVowel: NonBack:* %>: NonBack:* _ ;

The rule is basically saying: "Substitute {A} with e if the previous letters are anything except back vowels, then there is a morpheme boundary, then there are no back vowels, and at some point there is a front vowel"

Next up, to compile the rule and test it:

$ hfst-twolc -R -i apertium-tr-tk.tk.twol -o tk-tr.twol.hfst
Reading input from tk.twol.
Writing output to tk.twol.hfst.
Reading alphabet.
Reading sets.
Reading rules and compiling their contexts and centers.
Compiling and storing rules.
Compiling rules.
Storing rules.

With the power of intersecting composition!

In order to get the final transducer, what we need to do is combine the morphotactic model (lexc) with the morphographemic model (twol). There is a way of doing this called "intersecting composition" which is fairly efficient. There is also a tool in HFST called hfst-compose-intersect which is what we'll be using.

$ hfst-compose-intersect -1 tr-tk.lexc.hfst -2 tr-tk.twol.hfst -o tr-tk.autogen.hfst

Now we can test the final transducer:

$ hfst-fst2strings tr-tk.autogen.hfst
maşgala<n>:maşgala
maşgala<n><pl>:maşgalalar
esger<n>:esger
esger<n><pl>:esgerler

Great!! We have the desired forms.

Analysis and generation

The transducer we made above was for generation, but we can't yet use it with hfst-proc because of the format. If we want to use it with hfst-proc, all we need to do is change the format, with the following command:

$ hfst-fst2fst -O -i tr-tk.autogen.hfst -o tr-tk.autogen.hfst.ol

Now we should be able to generate both of our plurals:

$ echo "^maşgala<n><pl>$" | hfst-proc -g tr-tk.autogen.hfst.ol
maşgalalar

and

$ echo "^esger<n><pl>$" | hfst-proc -g tr-tk.autogen.hfst.ol
esgerler

But what if we want to analyse some words ? Well, then we need to invert the transducer. This is changing the left side to the right side, and the right side to the left side, let's do it in two stages so we can see the results:

$ hfst-invert -i tr-tk.autogen.hfst -o tk-tr.automorf.hfst

$ hfst-fst2strings tk-mor.hfst
maşgala:maşgala<n>
maşgalalar:maşgala<n><pl>
esger:esger<n>
esgerler:esger<n><pl>

As we can see, now the left side is the surface form, and the right side the analysis. Now just to convert the analyser to optimised lookup format:

$ hfst-fst2fst -O -i tk-tr.automorf.hfst -o tk-tr.automorf.hfst.ol

And do some analysis:

$ echo "maşgalalar" | hfst-proc tk-tr.automorf.hfst.ol
^maşgalalar/maşgala<n><pl>$

$ echo "esgerler" | hfst-proc tk-tr.automorf.hfst.ol
^esgerler/esger<n><pl>$

Troubleshooting

Here is a brief troubleshooting checklist for when you do something, but it isn't working:

  • Are all your multicharacter symbols defined ? Including archivowels/consonants. If you think you added them, triple check. This goes for problems in twol as well as in lexc.

Notes

  1. Acest subiect este foarte complicat, dar pentru un exemplu didactic, este de ajuns

Further reading