Difference between revisions of "Apertium on Ubuntu or Debian"

From Apertium
Jump to navigation Jump to search
(This page really needs a cleanup.)
Line 1: Line 1:
  +
If you just want to run Apertium, and don't want to develop anything, you can probably just search for, tick off and install Apertium and your favorite language pairs in [https://help.ubuntu.com/community/SynapticHowto Synaptic]. This should install the required dependencies too.
1 sudo apt-get install subversion build-essential g++ pkg-config libxml2 libxml2-dev libxml-utils xsltproc flex automake autoconf libtool libpcre3-dev
 
  +
2 sudo apt-get install libxml2-dev
 
  +
4 sudo apt-get install subversion
 
  +
If you want to contribute to Apertium or change how it runs in any way, you'll want to install from SVN.
13 sudo apt-get install libtool
 
  +
First off all, run the following command to get the prerequisites:
15 sudo apt-get install automake autoconf
 
  +
17 sudo apt-get install g++
 
 
sudo apt-get install subversion build-essential g++ pkg-config libxml2 libxml2-dev libxml-utils xsltproc flex automake autoconf libtool libpcre3-dev
49 sudo apt-get install flex
 
51 sudo apt-get install libpcre3-dev
 
52 history | grep 'apt-get install'
 
   
   
There a various releases of Ubuntu :
 
*Dapper Drake
 
*Edgy Eft
 
*Feisty Fawn
 
*Gutsy Gibbon
 
   
 
== Installing by SVN (for all versions of Ubuntu) ==
 
== Installing by SVN (for all versions of Ubuntu) ==
Line 176: Line 169:
   
 
This documentation is partly based on the following resources:
 
This documentation is partly based on the following resources:
*http://apertium.sourceforge.net/install.html
+
* http://apertium.sourceforge.net/install.html
*[[Using SVN]]
+
* [[Using SVN]]
   
 
[[Category:Installation]]
 
[[Category:Installation]]

Revision as of 12:35, 10 December 2009

If you just want to run Apertium, and don't want to develop anything, you can probably just search for, tick off and install Apertium and your favorite language pairs in Synaptic. This should install the required dependencies too.


If you want to contribute to Apertium or change how it runs in any way, you'll want to install from SVN. First off all, run the following command to get the prerequisites:

   sudo apt-get install subversion build-essential g++ pkg-config libxml2 libxml2-dev libxml-utils xsltproc flex automake autoconf libtool libpcre3-dev


Installing by SVN (for all versions of Ubuntu)

Open a terminal window and type

sudo apt-get install subversion build-essential g++ pkg-config libxml2 libxml2-dev libxml2-utils xsltproc flex automake autoconf libtool libpcre3-dev  

enter your password

Wait till the packages are downloaded and installed.


svn co http://apertium.svn.sourceforge.net/svnroot/apertium/trunk apertium

Note: If you have limited bandwidth or disk space, please follow Minimal installation from SVN instead.


Go to lttoolbox directory with

cd apertium/lttoolbox

Then launch autogen.sh

./autogen.sh

Launch make

make

That last command may takes some minutes.

sudo make install
sudo ldconfig
 cd .. 
 cd apertium 
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig ./autogen.sh
make
sudo make install
sudo ldconfig

You have then to compile the language pairs that you want to use. It is the same procedure for every pair, we would give an example with apertium-fr-es

cd ..
cd apertium-fr-es/
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig ./autogen.sh
make
sudo make install

Make a test

echo "J'ai deux frères" | apertium fr-es

Replace $USER with your Ubuntu user name.

If you edit the linguistics data, do not forget to type "make" to update.


To compile all the pairs without typing each directory once you can use the following script :

list=`ls -d apertium-??-??` # list of folders with a name like apertium-xx-xx
for folder in $list 
do
 cd $folder >> ../compile.txt
 PKG_CONFIG_PATH=/usr/local/lib/pkgconfig ./autogen.sh >> ../compile.txt
 make >> ../compile.txt
 sudo make install >> ../compile.txt
 cd ..
done

Inside compile.txt you can see some of the results of the compilation.

Dapper Drake (6.06 LTS)

Several programs that are needed cannot be installed easily on Dapper Drake, because the version available with apt-get are too old. We suggest to install a newer version of Ubuntu as for example Edgy Eft or Feisty Fawn

Edgy Eft (6.10)

This is guide to install Apertium under Ubuntu Edgy Eft, aka Ubuntu 6.10

Installing tarball (tar.gz)

The tarball howto is not finnished yet.


Go to http://sourceforge.net/project/showfiles.php?group_id=143781&package_id=159345 and download the latest version

tar xzvf lttoolbox-2.0.3.tar.gz (or put the name of a newer version) cd lttoolbox-2.0.3/ ./configure sudo su (enter your password) make

Go to http://sourceforge.net/project/showfiles.php?group_id=143781&package_id=157932 and download the latest version (2.0.3 as of June 2007)

tar xzvf apertium-2.0.3.tar.gz (or put the name of a newer version) cd apertium-2.0.3.tar.gz ./configure

Feisty (7.04)

From Ubuntu's repository

An old version of Apertium is available for Feisty (http://packages.ubuntu.com/feisty/libs/apertium)


Example: installing apertium and apertium-es-ca sudo apt-get install apertium apertium-es-ca or System -> Administration -> Synaptic -> Search apertium-es-ca -> Install


Gutsy Gibbon (7.10)

There is an apertium version in ubuntu repository and you can do the same like Feisty.

Hardy Heron (8.04 LTS)

There is an apertium version in ubuntu repository. Try with Synaptic There are backports of the Apertium 3.1 packages for Hardy at pgquiles' PPA

Next releases

Try with Synaptic


Troubleshooting

‘rpl_malloc’ was not declared in this scope

If you get:

make check output
apertium_destxt.o apertium_destxt.cc
apertium_destxt.cc: In function ‘void* yyalloc(yy_size_t)’:
apertium_destxt.cc:2017: error: ‘rpl_malloc’ was not declared in this scope
apertium_destxt.cc: In function ‘void* yyrealloc(void*, yy_size_t)’:
apertium_destxt.cc:2029: error: ‘rpl_realloc’ was not declared in this scope
make[1]: *** [apertium_destxt.o] Error 1
make[1]: Leaving directory `/home/surge/Resources/apertium/apertium-3.1.0/apertium'

Then the best thing to do is comment out the lines:

AC_FUNC_MALLOC
AC_FUNC_REALLOC

From the configure.ac and then re-run autogen.sh.

Source

This documentation is partly based on the following resources: