Apertium and Constraint Grammar
This page describes the use of Constraint Grammar (CG) within the Apertium MT platform. Constraint Grammar is often used as a pre-disambiguator for the Apertium tagger, allowing the imposition of more fine grained constraints than would be otherwise possible.
- lttoolbox (>= 3.0.5)
- Apertium (>= 3.0.0)
- ICU (>= 3.8)
- A language pair (examples use
- VISL CG3 (from SVN -- see below)
Installing VISL CG3
sudo apt-get install software-properties-common sudo add-apt-repository ppa:tinodidriksen/cg3 sudo apt-get update sudo apt-get install cg3
You will need to install
cmake. To install it in Debian/Ubuntu just type
apt-get install cmake.
You will need to install
libicu-dev. To install it in Debian/Ubuntu just type
apt-get install libicu-dev.
You will need to install
libboost-dev. To install it in Debian/Ubuntu just type
apt-get install libboost-dev.
You may want to install
tmalloc. To install it in Debian/Ubuntu just type
apt-get install libgoogle-perftools-dev.
$ svn co http://beta.visl.sdu.dk/svn/visl/tools/vislcg3/trunk vislcg3 $ cd vislcg3 $ ./cmake.sh $ make -j3 $ make install
(For those installing in a prefix, use
You should now have four binaries in
vislcg3— is the original disambiguator. It has all the features available and uses the CG input / output format.
cg-comp— is a program to compile grammars into a binary format.
cg-proc— is a program to run binary grammars on an apertium formatted input stream.
cg-conv— is a program to convert between stream formats on-the-fly.
Note: The Apertium support in VISL CG is still under development and thus bugs may be found.
Lets take an example from Apertium, we have:
$ echo "vino a la playa" | lt-proc es-ca.automorf.bin ^vino/vino<n><m><sg>/venir<vblex><ifi><p3><sg>$ ^a/a<pr>$ ^la/el<det><def><f><sg>/lo<prn><pro><p3><f><sg>$ ^playa/playa<n><f><sg>$
Here we have two ambiguities, the first is between a noun and a verb, the second is between a determiner and a pronoun. The more appropriate sequence would be verb prep det noun. We can write some rules in CG to enforce this.
First we define our categories, these can be tags, wordforms or lemmas. It might help to think of them as "coarse tags", which may involve a set of fine tags or lemmas. So, create a file
grammar.txt, and add the following text:
DELIMITERS = "<$.>" ; LIST NOUN = n; LIST VERB = vblex; LIST DET = det; LIST PRN = prn; LIST PREP = pr; SECTION
Note: The delimiters statement is used to define Window boundaries.
The next thing we want to do is write the two rules, so:
- Rule #1
- "When the current lexical unit can be a pronoun or a determiner, and it is followed on the right by a lexical unit which could be a noun, choose the determiner"
# 1 SELECT DET IF (0 DET) (0 PRN) (1 NOUN) ;
Add this rule to the file, and compile using
$ ./cg-comp grammar.txt grammar.bin Sections: 1, Rules: 1, Sets: 6, Tags: 7
Now try testing it in the Apertium pipeline:
$ echo "vino a la playa" | lt-proc es-ca.automorf.bin | cg-proc grammar.bin ^vino/vino<n><m><sg>/venir<vblex><ifi><p3><sg>$ ^a/a<pr>$ ^la/el<det><def><f><sg>$ ^playa/playa<n><f><sg>$
As we can see, the determiner reading has been selected over the pronoun reading.
- Rule #2
- "When the current lexical unit can be a noun or a verb, if the subsequent two units to the right are preposition and determiner, remove the noun reading."
# 2 REMOVE NOUN IF (0 NOUN) (0 VERB) (1 PREP) (2 DET) ;
Add this rule, re-compile the grammar and test:
$ echo "vino a la playa" | lt-proc es-ca.automorf.bin | cg-proc grammar.bin ^vino/venir<vblex><ifi><p3><sg>$ ^a/a<pr>$ ^la/el<det><def><f><sg>$ ^playa/playa<n><f><sg>$
Voilà! A fully disambiguated sentence. Its worth noting that the
REMOVE statements can be thought of as similar to the forbid / enforce constraints in the TSX format used by
apertium-tagger, only much more flexible.
Matching unknown words in Apertium
lttoolbox prepends a star to unknown words, so you can match unknown words using a simple regexp matching that star:
LIST unknown = ("\\*.*"r) ;
Now you can have a rule like
SELECT proper-name IF (1 unknown);
Applying a grammar to lexical selection
SECTION SELECT ("season") IF (0 ("<estació>")) ;
$ echo "^estació<n><f><sg>/season<n><sg>/station<n><sg>$" | cg-proc /tmp/cg-test.bin ^estació<n><f><sg>/season<n><sg>$
To apply the above two-rule grammar to an input text of 10,000 lines (40,000 words), it took approximately 12 seconds (~3,000 words/second). As a comparison, the
apertium-tagger processes this in 1.5 seconds (~26,000 words/second). Tested with a larger grammar, for Faroese — of 204 rules, the performance drops to (~2,000 words/second).
vislcg3 provides tracing, showing which rules were applied, although the cg-proc command doesn't support this. However, for development purposes, we can use
cg-conv -a to turn Apertium-formatted text into the vislcg3 format, and then just use the vislcg3 command:
$ echo "vino a la playa" | lt-proc es-ca.automorf.bin | cg-conv -a | vislcg3 --trace -g grammar.txt
This is really handy, since you quickly get the line number (and rule name, if you specified one) for each change made to the stream by vislcg3.
If you get
/usr/local/bin/cg-proc: invalid option -- 'w' /usr/local/bin/apertium: line 480: 9764 Avbrutt (SIGABRT) $APERTIUM_PATH/apertium-re$FORMATADOR > $SALIDA
that means your vislcg3 needs updating.
After you update vislcg3, you're likely to get something like
Error: Grammar revision is 4879, but this loader requires 5465 or later!
You need to recompile your CG grammars each time you've updated vislcg3, eg.
cd apertium-nn-nb touch *.rlx # trick make into thinking the grammars need recompiling make sudo make install