Курсы машинного перевода для языков России/Session 4
Цель данного раздела - описать процесс лексической передачи и лексического выбора. В теоретической части будет более подробно рассказано почему передаваемый словарь (или двуязычный словарь) не всегда представляют собой просто соответствия между леммы/части речи одного языка и леммы/части речи другого языка. В практической части мы добавим три вида записи (введения данных), cannot always be just correspondences between lemmas/parts-of-speech in one language and lemmas/parts-of-speech in another. In the practice section, we will add three entries, a simple one-to-one entry, a many-to-one entry and a one-to-many entry.
Теория
Существует два аспекта в лексической передаче, первый - выбор наиболее подходящего перевода, второй - выделение в записях особых характеристик, которые нужно the second is marking in the entries features which need to be inferred by transfer rules. Например, при выборе наиболее часто встречающегося перевода чувашского слова тӳпе на русский, когда есть несколько возможных вариантов, включая вершина, крыша и небо мы выбираем первый. А при выборе единственного или множественного числа в переводе русского слова брюки на татарский (например, чалбар, чалбарлар) выбираем второй.
Translation equivalences
The simple model of translation is that you look up each word in the source language sentence in a list to find the target language equivalent and then substitute it. This is problematic because the relationship between words in the source language, and words in the target language is often many-to-many, not one-to-one — this is because words can be polysemous (have many meanings) and these meanings can have different translations. One way of extending this basic model is to allow words to be distinguished based on lexical category, or part-of-speech. So for example, the Kyrgyz word жаз could be a verb, or a noun, leading to the translations писать or весна in Russian respectively.
| Chuvash | Russian | |
|---|---|---|
| тӳпе | ↔ | вершина |
| тăрă | → | вершина |
| тӳпе | ← | небо |
| тӳпе | ← | крыша |
| ... | ||
This is an example of a more-or-less one-to-one correspondence, the meanings for жаз in Kyrgyz and весна in Russian match up. However this is not always the case. Another possibility is that more than one word in the source language translates to a single word in the target language. For example, both of the Russian words вершина and небо can translate to тӳпе in Chuvash. In fact, the relationship between the words is many-to-many.
For machine translation, to say that вершина, небо and крыша all translate to тӳпе is not problematic. That saison can also translate to temporada and that тӳпе has three (or more) translations in Russian is problematic.
Using part-of-speech information to disambiguate lexical relationships can reduce the problem, but not eliminate it entirely. Even after the part-of-speech has been disambiguated, one word may have many translations, as in the тӳпе example. So, how can this one-to-many translation problem be solved. The most obvious way is to choose the most frequent, or general translation — in this case xxx.
Apertium currently has an experimental module to treat the problem of lexical selection, that is choosing the most appropriate translation of a source language lexical form given its context, but the use of multiwords can also offer a partial solution, for example in the cases where there are frequent collocations which are exceptions to the general translation (for example, Spanish to French: estación del año → saison de l'année).
Dialect forms
Often it can be desirable to be able to translate dialect forms from one language into standard forms in another. For example, in Russian, the word мясо "meat" can be translated into Chuvash as аш, какай, оr аш-какай. The first two translations are considered more dialectal and mostly used in the spoken language. The third is more standard and preferred in the written language.
Grammatical divergence
Another problem of lexical transfer is grammatical divergence between the two languages.
- Words may change gender and number between languages (e.g. Russian брюки — in plural translates to Bashkir салбар — in singular)
- Words in the source language may be ambiguous for features such as number (French temps to Spanish tiempo or tiempos) or gender (Spanish estudiante — which can be masculine or feminine to French étudiant, masculine or étudiante, feminine).
- Other features than can be useful for lexical transfer between some languages are if the target noun is mass or count — for example to decide if an article should be inserted when translating from a language without articles to a language with articles.
- Also, for languages that have both adjectives which inflect for comparison, and adjectives which don't — it is useful to specify this in the bilingual dictionary.
All of these need to be taken care of in the transfer lexicon (bilingual dictionary).
Practice
For this practical, the examples will be from the Tatar--Bashkir language pair, so navigate to the directory apertium-tt-ba. The bilingual dictionary (or transfer lexicon) is in the file apertium-tt-ba.tt-ba.dix. Open it.
One to one
You may remember that we added the word чалбар to the Tatar dictionary in the first session, we'll keep with this example for the simple one-to-one bilingual dictionary entries.
So, for example, search for the entry >песи<,
<e><p><l>песи<s n="n"/></l><r>бесәй<s n="n"/></r></p></e>
Copy the entry and change the lexical forms on the source and target side, so you have something that looks like:
<e><p><l>песи<s n="n"/></l><r>бесәй<s n="n"/></r></p></e>
<e><p><l>чалбар<s n="n"/></l><r>салбар<s n="n"/></r></p></e>
Save the dictionary and exit out of the text editor, and we can compile the dictionary with the following command:
$ lt-comp lr apertium-tt-ba.tt-ba.dix tt-ba.autobil.bin
We can test it as follows:
$ echo "чалбар" | hfst-proc tt-ba.automorf.hfst | apertium-tagger -g tt-ba.prob |\ apertium-pretransfer | lt-proc -b tt-ba.autobil.bin ^чалбар<n><nom>/салбар<n><nom>$
This command shows you the input lexical form, and the output lexical form after having been passed through the bilingual dictionary.
Many to one
The next job is to perform a translation from many words, to one word. The word морон in Tatar can be transated as борын in Bashkir, but this word is not currently in the dictionaries. We first want to search for the word борын in the file apertium-tt-ba.tt-ba.dix, and we'll find the following entry:
<e><p><l>борын<s n="n"/></l><r>танау<s n="n"/></r></p></e>
We can add an entry to translate морон → борын, but in order to do this we need to also add a direction restriction, so that that this entry only applies when translating from Bashkir to Tatar. Restriction are added to the <e> element with the r attribute and come in two flavours, LR or left-to-right and RL or right-to-left. The file is called apertium-tt-ba.tt-ba.dix with Tatar on the left and Bashkir on the right. So, if we want to translate only from Bashkir to Tatar we need to add a right-to-left (RL) direction restriction. Copy the entry and paste it below, then change the lemma and add the restriction.
<e><p><l>борын<s n="n"/></l><r>танау<s n="n"/></r></p></e>
<e r="RL"><p><l>борын<s n="n"/></l><r>морон<s n="n"/></r></p></e>
For the importance of direction restrictions, see Session 7. Now compile the dictionary and test the new entry:
$ lt-comp rl apertium-tt-ba.tt-ba.dix ba-tt.autobil.bin
main@standard 1228 1995
$ lt-comp lr apertium-tt-ba.tt-ba.dix tt-ba.autobil.bin
main@standard 1226 1990
$ echo "борын" | hfst-proc tt-ba.automorf.hfst | apertium-tagger -g tt-ba.prob |\
apertium-pretransfer | lt-proc -b tt-ba.autobil.bin
^борын<n><nom>/танау<n><nom>$
$ echo "танау" | hfst-proc ba-tt.automorf.hfst | apertium-tagger -g ba-tt.prob |\
apertium-pretransfer | lt-proc -b ba-tt.autobil.bin
^танау<n><nom>/борын<n><nom>$
$ echo "морон" | hfst-proc ba-tt.automorf.hfst | apertium-tagger -g ba-tt.prob |\
apertium-pretransfer | lt-proc -b ba-tt.autobil.bin
^морон<n><nom>/борын<n><nom>$
We use the direction restrictions when we never want to be able to translate a word in that direction, e.g. in the case of dialect or substandard forms. But sometimes it might be desirable to have two possible translations.
One to many
| Finnish | North Sámi | |
|---|---|---|
| pitää | ↔ | doallat |
| pitää | → | berret |
| pitää | → | liikot |
| pitää | → | coakcut |
| pitää | ← | galgat |
For this section of the practical, you need to be in the apertium-sme-fin directory. The bilingual dictionary is apertium-sme-fin.sme-fin.dix
In this subsection we will add some entries for lexical forms with more than one translation, and write lexical selection rules to select the non-default translations.
If we take the example of pitää in Finnish, we find that it can also be translated with several words in North Sámi, so if we want to add some non-default translations of it, we can do it as follows:
<e c="hold (acc)"><p><l>doallat<s n="V"/><s n="TV"/></l><r>pitää<s n="V"/></r></p><par n="V_V"/></e> <e c="ought to"><p><l>berret<s n="V"/><s n="IV"/></l><r>pitää<s n="V"/></r></p><par n="V_V"/></e> <e c="like (ela)"><p><l>liikot<s n="V"/><s n="IV"/></l><r>pitää<s n="V"/></r></p><par n="V_V"/></e> <e c="get a foothold"><p><l>coakcut<s n="V"/><s n="IV"/></l><r>pitää<s n="V"/></r></p><par n="V_V"/></e>
If we also want to add a translation from galgat → pitää, then we need to add another entry, this time marking it with LR for translating only from North Sámi to Finnish.
<e r="LR"><p><l>galgat<s n="V"/><s n="IV"/></l><r>pitää<s n="V"/></r></p><par n="V_V"/></e>--><!-- skulle, should -->
Compile the dictionary in the usual way:
$ lt-comp rl apertium-sme-fin.sme-fin.dix fin-sme.autobil.bin main@standard 15454 19523
And try out the new entries as follows:
$ echo "Minä pidän kirjan." | hfst-proc fin-sme.automorf.hfst | cg-proc fin-sme.rlx.bin | apertium-tagger -g fin-sme.prob | lt-proc -b fin-sme.autobil.bin ^Mikä<Pron><Interr><Sg><Ess>/Mii<Pron><Interr><Sg><Ess>$ ^pitää<V><Act><Ind><Prs><Sg1><@+FMAINV>/berret<V><IV><Ind><Prs><Sg1><@+FMAINV>/liikot<V><IV><Ind><Prs><Sg1><@+FMAINV>/doallat<V><TV><Ind><Prs><Sg1><@+FMAINV>/coakcut<V><IV><Ind><Prs><Sg1><@+FMAINV>$ ^kirja<N><Sg><Gen><@←OBJ>/girji<N><Sg><Gen><@←OBJ>$^.<Punct><CLB>/.<CLB>$
In the case of ambiguity in the lexical transfer, the transfer component will pick the first translation to continue with, if the first translation is not the desired translation, a lexical selection rule can be made which chooses a different one:
Make a file apertium-sme-fin.fin-sme.lrx, and paste the following text
<rules>
<rule>
<match lemma="pitää" tags="V.*">
<select lemma="doallat" tags="V.TV.*"/>
</match>
</rule>
</rules>
You can compile this rule using apertium-lrx-comp:
$ apertium-lrx-comp apertium-sme-fin.fin-sme.lrx fin-sme.lrx.bin 1 Written 1 rules, 2 patterns.
And test it as follows:
$ echo "Minä pidän kirjan." | hfst-proc fin-sme.automorf.hfst | cg-proc fin-sme.rlx.bin | apertium-tagger -g fin-sme.prob | lt-proc -b fin-sme.autobil.bin | apertium-lrx-proc fin-sme.lrx.bin ^Mikä<Pron><Interr><Sg><Ess>/Mii<Pron><Interr><Sg><Ess>$ ^pitää<V><Act><Ind><Prs><Sg1><@+FMAINV>/doallat<V><TV><Ind><Prs><Sg1><@+FMAINV>$ ^kirja<N><Sg><Gen><@←OBJ>/girji<N><Sg><Gen><@←OBJ>$^.<Punct><CLB>/.<CLB>$
As you can see the default translation doallat has been chosen. But what if we want to choose a non-default translation in certain contexts ? With an elative following as opposed to an accusative/genitive, a better translation is liikot, so let's add a rule for that:
<rule>
<match lemma="pitää" tags="V.*">
<select lemma="liikot" tags="V.*"/>
</match>
<match tags="*.Ela"/>
</rule>
You can compile it again, and try this rule with a sentence like Minä pidän sinusta. "I like you" .
Lexical selection
There is a separate handout on using lexical selection rules.
