Difference between revisions of "Emacs"

From Apertium
Jump to navigation Jump to search
(dix-hungry-backspace)
Line 205: Line 205:
EOF
EOF


convert () {
⚫
echo "Creating rnc files in ${APERTIUMSRC}/apertium"
⚫
for inf in *.dtd; do
⚫
cd ${APERTIUMSRC}/apertium
for DTD in `ls *.dtd`; do
out=${inf%%.dtd}.rnc
⚫
java -jar "${TRANGJAR}" "$inf" "$out"
OUT=`echo $DTD | sed 's/dtd$/rnc/'`;
⚫
done
⚫
CMD="java -jar ${TRANGJAR} $DTD $OUT"
}
echo $CMD
eval $CMD
⚫
done


(
⚫
echo "Creating rnc files in ${LTTOOLBOXSRC}/lttoolbox"
⚫
echo "Creating rnc files in ${APERTIUMSRC}/apertium"
⚫
cd ${LTTOOLBOXSRC}/lttoolbox
⚫
cd "${APERTIUMSRC}/apertium"
⚫
for DTD in `ls *.dtd`; do
convert
OUT=`echo $DTD | sed 's/dtd$/rnc/'`;
)
CMD="java -jar ${TRANGJAR} $DTD $OUT"
(
echo $CMD
⚫
echo "Creating rnc files in ${LTTOOLBOXSRC}/lttoolbox"
eval $CMD
⚫
cd "${LTTOOLBOXSRC}/lttoolbox"
done
convert
)


echo "Now inform nxml-mode about ${SCHEMAFILE} by appending this to ~/.emacs:"
echo "Now inform nxml-mode about ${SCHEMAFILE} by appending this to ~/.emacs:"

Revision as of 09:32, 28 January 2015

Info on using Emacs for Apertium-related tasks.

dix and transfer

Quickstart for non-emacs users

If you just want to get emacs set up for dix editing with the minimum of hassle, here is a howto. This assumes you have emacs version 23 or higher installed (but see discussion page if you're stuck with an old version). First execute (paste) the following commands in your terminal: 

mkdir -p ~/.emacs.d
cd ~/.emacs.d
wget -O dix.el https://svn.code.sf.net/p/apertium/svn/trunk/apertium-tools/dix.el
cd ..
touch ~/.emacs

Then open the file ~/.emacs in an editor (like vi) and enter the following: 

; Start of dix-mode setup
(add-to-list 'load-path "~/.emacs.d") ; path to the folder where you have dix.el
(autoload 'dix-mode "dix" 
   "dix-mode is a minor mode for editing Apertium XML dictionary files."  t)

(add-to-list 'auto-mode-alist '("\\.dix\\'" . nxml-mode)) ; turn on nxml-mode for dix-files
(add-to-list 'auto-mode-alist '("\\.t[0-9]x\\'" . nxml-mode)) ; turn on nxml-mode for transfer files
(add-hook 'nxml-mode-hook               ; turn on dix-mode for transfer or dix-files after nxml-mode
 	  (lambda () (and buffer-file-name
 			  (string-match "\\.\\(dix\\|t[0-9]x\\)$" buffer-file-name)
 			  (dix-mode 1))))

; turn on schema-based completion with C-RET (in emacs 24 and up: M-TAB or C-M-i):
(if (boundp 'nxml-completion-hook)
    (add-to-list 'nxml-completion-hook 'rng-complete)
  (setq nxml-completion-hook '(rng-complete)))


; Optional, gives more handy keybindings in nxml-mode:
(setq nxml-sexp-element-flag t           ; treat <e><p>...</p></e> like (e (p ...)) for C-M-f/b/k/d/u
      nxml-slash-auto-complete-flag t)   ; complete the element on </
(add-hook 'nxml-mode-hook (lambda () (define-key nxml-mode-map (kbd "M-D") 'nxml-backward-down-element)))

; Optional, lets you erase whole <b/> or comment with a single press of backspace:
(setq dix-hungry-backspace t)


; The rest of this file is optional, it turns on CUA mode setup,
; which makes copy-pasting in Emacs behave more like other editors - see http://www.emacswiki.org/CuaMode
(cua-mode t)
(setq cua-auto-tabify-rectangles nil) ; Don't tabify after rectangle commands
(setq cua-keep-region-after-copy t) ; Standard Windows behaviour

See also the Validation quickstart for auto-validation and schema-based completion.

The following sections give more info on the general xml editing mode nxml, dix-mode and validation.

nxml-mode

Emacs has a nice xml editing mode called nXML, with syntax highlighting, movement commands to navigate through the XML (out of, into, across elements, etc.). It also has validation, and can auto-complete using the XML schema if a schema file is available.

If your emacs doesn't turn on nxml-mode automatically when you open an xml-file, you can add the following line to your ~/.emacs file: 

(add-to-list 'auto-mode-alist '("\\.dix\\'" . nxml-mode))

Emacs 23 or newer includes nxml-mode, but if your version of emacs doesn't: download nxml-mode-20041004.tar.gz (or whatever the newest version is) from http://www.thaiopensource.com/download/, extract somewhere, and add the following to your .emacs file: 

  (load "/path/to/nxml-mode-20041004/rng-auto.el") ; full path to the _file_ rng-auto.el which you just extracted

keybindings

Some very handy nxml functions don't have keybindings by default. Here are some lines for your ~/.emacs that define keys for the most useful ones: 

(setq nxml-sexp-element-flag t           ; treat <e><p>...</p></e> like (e (p ...)) for C-M-f/b/k/d/u
      nxml-slash-auto-complete-flag t)   ; complete the element on </
(add-hook 'nxml-mode-hook (lambda () (define-key nxml-mode-map (kbd "M-D") 'nxml-backward-down-element)))

With these in your ~/.emacs, you can use the following keys:

  • C-M-f to move forward one element (e.g. from <e> to </e>)
  • C-M-b to move backward one element (e.g. from </e> to <e>)
  • C-M-d to move into one element (e.g. from <e> to <p>)
  • M-S-d (meta-shift-d) to move into one element backwards (e.g. from after </e> to after </p>)
  • C-M-u to move out of one element (e.g. from <p> to <e>)
  • C-M-k to kill (cut) one element
  • </ to write the end tag of whatever element you're in (e.g. after typing <e><p>…</p>&lt/, it'll complete with e>)

dix-mode

Screenshot of an older version of dix.el in Aquamacs (fullscreen). Upper left window has output from dix-view-pardef, lower left shows rng schema completion. There is a red underline since a p can't be an empty element, as noted by the message in the minibuffer

In svn there is a minor mode for editing .dix files, dix.el (or use svn co https://apertium.svn.sourceforge.net/svnroot/apertium/trunk/apertium-tools). It needs nxml-mode (see above, installed by default in emacs version 23 or above). There are some short screencasts here.

Put the following in your ~/.emacs file to use it: 

 (add-to-list 'load-path "/path/to/dix.el-folder") ; ie. path to the _folder_ containing dix.el
 (autoload 'dix-mode "dix" 
   "dix-mode is a minor mode for editing Apertium XML dictionary files."  t)
 (add-hook 'nxml-mode-hook
 	  (lambda () (and buffer-file-name
 			  (string-match "\\.dix$" buffer-file-name)
 			  (dix-mode 1))))

I use Apertium-dixtools-formatted dix, not all functions have been tested in the regular format, but I've tried to make the functions use XML-movements so mostly they should work no matter how you format your files.

When you open emacs (after adding the above lines to ~/.emacs) and load a .dix-file, you should see a menu named dix. Most of the functions added by dix-mode are shown in this menu (which also shows their keyboard shortcuts). Hovering over a menu-item might give a little popup-help. The Help for dix-mode entry will show all the user functions defined by dix-mode. The keyboard shortcuts are in general a lot more useful than the menu bar, which is mostly there in case you forget which buttons to press... Remember: C is Control, S is Shift, M is alt (well, M stands for Meta, but that's typically alt).


Some useful functions in dix-mode:

  • Movement and editing:
    • The space bar inserts a <b/> in <r>, <l> or <i> elements; a _ in par/pardef names; otherwise a plain space.
    • M-n and M-p move to the next and previous "important bits" of <e>-elements (just try it!).
  • Copying elements and adding restrictions:
    • C-c C just creates a copy of the current <e> element, putting it below the current one
    • C-c L and C-c R also make a copy of the current <e> element, but with an LR or RL restriction
    • C-TAB cycles between the restriction possibilities LR, RL or none for the current <e> element
    • C-S-TAB, used with elements that have the slr/srl attribute, will swap the sense translation of this <e> with the <e> above
  • Creating elements from plain text:
    • C-c g in a monodix guesses the pardef for a word based on the suffix. Write a word in the bottom of a dix files, place point somewhere in the middle of the word, and hit C-c g, it'll try to find words earlier in the file that have the same ending (characters after point)
    • C-c x in a monodix or bidix turns a word-list into <e> entries using the above <e> entry as a template. Words should be written one per line. You can use it in a bidix by writing the left-side, then a colon (:) then the right-side. Assumes that the entry used as a template is written all on one line.
  • Pardef viewing and manipulation:
    • C-c G will go to the pardef of the nearest <par>
      • the place you left is saved in the standard emacs fashion, so you can go back by pressing C-u C-SPACE
    • C-c V will show the pardef of the nearest <par> in another window
    • C-c S will sort a pardef by its right-hand-side, <r>.
      • You can also do M-x dix-sort-e-by-l to sort the selected <e;> elements by the contents of their <l> element
    • C-c D (in a pardef or an <e>) will print a list of all pardefs which have the same suffixes as this one (where a 'suffix' is the contents of an <l>-element), useful for finding duplicates. Note: it ignores the tags
    • Inside a pardef, C-c A shows all usages of that pardef within the dictionaries represented by the variable `dix-dixfiles'


Note: capital letters means you have to press shift. If you fancy other keyboard shortcuts, copy the relevant define-key entries from the bottom of dix.el, put them in your ~/.emacs, e.g. to add F12 as an alternative to C-c V: 

(add-hook 'dix-mode-hook (lambda nil (define-key dix-mode-map (kbd "<f12>") 'dix-view-pardef)))

(the whole add-hook thing is needed since dix-mode is not loaded until the first .dix-file is loaded)


Also, if you like having all <i> elements aligned at eg. column 25, select a region and do M-x align to achieve that (this also aligns <p> to 10 and <r> to 44, for bidix). These numbers are customizable with M-x customize-group RET dix. (Ie. there's no extra indentation function, but then, nxml already has that.)

dix-mode for transfer rules

Useful in transfer mode too!

There are some transfer-specific functions in dix-mode that make it worth turning on in transfer mode files too, e.g. C-c n, which lets you enter a rule number to go to (useful when tracing with apertium-transfer -t). The .emacs in the Quickstart section will turn on nxml-mode and dix-mode in transfer files (ie. all files with the suffix .t1x, .t2x, .t3x, etc.).

M-n and M-p (go to next/previous useful position) should also Do What You Mean in transfer files.

Validation (Relax NG-schemas)

Validation quickstart

Download and extract trang by executing (pasting) this into your terminal: 

cd
wget http://jing-trang.googlecode.com/files/trang-20091111.zip
unzip trang-20091111.zip

Then copy this script to a file like "makeschema.sh", making sure to set APERTIUMSRC to the folder containing the apertium source, and TRANGJAR to the path to the trang jar-file you just extracted: 

#!/bin/bash

## Set these to the correct paths:
APERTIUMSRC="$HOME/apertium-svn/trunk/apertium"
LTTOOLBOXSRC="$HOME/apertium-svn/trunk/lttoolbox"
TRANGJAR="$HOME/trang-20091111/trang.jar"
SCHEMAFILE=~/.emacs.d/schemas.xml
# Change SCHEMAFILE if you want to put your schema locating file somewhere else.
# Note: this path can't have quotes around it for some reason

## No changes needed below

echo "Creating ${SCHEMAFILE}"
cat > ${SCHEMAFILE} <<EOF
<?xml version="1.0"?>
<locatingRules xmlns="http://thaiopensource.com/ns/locating-rules/1.0">
  <typeId id="dix" uri="${LTTOOLBOXSRC}/lttoolbox/dix.rnc"/>
  <typeId id="transfer" uri="${APERTIUMSRC}/apertium/transfer.rnc"/>
  <typeId id="interchunk" uri="${APERTIUMSRC}/apertium/interchunk.rnc"/>
  <typeId id="postchunk" uri="${APERTIUMSRC}/apertium/postchunk.rnc"/>
  <typeId id="format" uri="${APERTIUMSRC}/apertium/format.rnc"/>
  <typeId id="tagger" uri="${APERTIUMSRC}/apertium/tagger.rnc"/>
  <typeId id="modes" uri="${APERTIUMSRC}/apertium/modes.rnc"/>

  <documentElement localName="dictionary" typeId="dix"/>
  <documentElement localName="transfer" typeId="transfer"/>
  <documentElement localName="interchunk" typeId="interchunk"/>
  <documentElement localName="postchunk" typeId="postchunk"/>
  <documentElement localName="format" typeId="format"/>
  <documentElement localName="tagger" typeId="tagger"/>
  <documentElement localName="modes" typeId="modes"/>

  <uri pattern="*.dix" typeId="dix"/>
  <uri pattern="*.t1x" typeId="transfer"/>
  <uri pattern="*.t2x" typeId="interchunk"/>
  <uri pattern="*.t3x" typeId="interchunk"/>
  <!-- Some pairs have t3x as postchunk, others t4x or even t5x... but
       if one of the documentElement rules match, these rules are
       ignored since they're below them. -->
</locatingRules>
EOF

convert () {
    for inf in *.dtd; do
        out=${inf%%.dtd}.rnc
        java -jar "${TRANGJAR}" "$inf" "$out"
    done
}

(
    echo "Creating rnc files in ${APERTIUMSRC}/apertium"
    cd "${APERTIUMSRC}/apertium"
    convert
)
(
    echo "Creating rnc files in ${LTTOOLBOXSRC}/lttoolbox"
    cd "${LTTOOLBOXSRC}/lttoolbox"
    convert
)

echo "Now inform nxml-mode about ${SCHEMAFILE} by appending this to ~/.emacs:"
cat <<EOF

(add-hook 'nxml-mode-hook
	  (lambda ()
	    (add-to-list 'rng-schema-locating-files "${SCHEMAFILE}")))
EOF

Run it like 

sh makeschema.sh

and add the hook to your ~/.emacs as instructed by the script.

More about nxml validation

nxml-mode uses compact Relax NG schemas (.rnc files) for validation (without these, XML is only checked for well-formedness by nxml-mode).

You can make compact Relax NG schemas using trang, see the above script.

Note: if you want to auto-complete using the schema (keyboard shortcut: C-RET in emacs 23; changed to M-TAB or C-M-i in emacs 24 and up), you should have (add-to-list 'nxml-completion-hook 'rng-complete) somewhere in your ~/.emacs.

You can toggle validation using the XML menu at the top of the screen, or the keyboard shortcut C-c C-v.

See http://www.dpawson.co.uk/relaxng/nxml/schemaloc.html#d574e168 for how to write a schema.xml file to automatically find the right schema, or just use the quickstart script above.

Yasnippet

Yasnippet is a snippet-expansion package for Emacs. It lets you write boilerplate faster. This section shows how to use the snippets made for dix-mode. There's a short screencast of it at https://asciinema.org/a/11192

To use, first install yasnippet by doing M-x package-refresh-contents and M-x package-install RET yasnippet RET (assuming you've added melpa to your package-archives).

Then get the dix-mode snippets, this will put them (and a bunch of other snippets) into the default snippets path: 

git clone -b dix-mode https://github.com/unhammer/yasnippet-snippets.git ~/.emacs.d/snippets

Then put this into ~/.emacs.d/init.el to make the snippets available in dix-mode: 

(eval-after-load 'yasnippet
  '(progn
     (setq yas-verbosity 1)
     (yas-reload-all)
     (remhash 'nxml-mode yas--tables) ; until https://github.com/AndreaCrotti/yasnippet-snippets/issues/41 is solved
     (add-to-list 'yas-key-syntaxes 'dix-yas-skip-backwards-to-key)
     ; The default is to use a point-and-click menu when there are several choices, I prefer ido:
     (setq yas-prompt-functions '(yas-ido-prompt yas-completing-prompt yas-dropdown-prompt yas-no-prompt))
  ))
(add-hook 'dix-mode-hook 'yas-minor-mode)

C++

See Emacs C style for Apertium hacking.

HFST

CG

Screenshot after running the grammar (C-c C-c) on an rlx file in cg.el

If you've checked out vislcg3 from SVN, you can ensure you have the latest cg.el by doing this: 

mkdir -p ~/.emacs.d
cd .emacs.d
ln -s ~/src/vislcg3/trunk/emacs/cg.el

replacing ~/src/vislcg3/trunk for wherever you checked out vislcg3/trunk.

If you want to test the CG while you're working on it from within Emacs, you can add a line like 

# -*- cg-pre-pipe: "apertium -d . nb-nn-morph|cg-conv -a 2>/dev/null" -*-

to the top of your CG file (replace nb-nn-morph for whatever mode that runs everything up until cg-proc in your regular mode, or just use something like lt-proc some.automorf.bin|cg-conv -a 2>/dev/null). Then close and re-open the file, and hit ! when you're asked whether you approve of the command (you only have to do this once).

Now you can do C-c C-i to type in some test text, then C-c C-c (either in that buffer or in the CG buffer) to test the CG on the text. You can do C-c c to toggle if you want to test the text for every change you do (some might find that annoying). You can click REMOVE, SELECT, MAP, ADD etc. in the output to go to the corresponding line, or use C-c C-n / C-c C-p to go back and forth between occurrences (also works for warnings and compile errors).

Screenshot after running the grammar (C-c C-c) and hitting u to hide everything but analyses containing det dem

If you have a lot of input sentences you want to test at once, you can hide all analyses, except ones matching some regex. Select the output buffer, then hit u and type in a regex for analyses you want to see (e.g. vblex, or \b\(sg\|pl\)\b to match pl or sg but not the string "place"). Now you should see only the wordforms in the output buffer, except for analyses containing your exceptions. Type h to toggle between a full view and hiding (click a word when hiding and press h to ensure you're scrolled into the analysis of that word). See also the variable cg-sent-tag which is used to keep linebreaks after certain tags; if you use a non-Apertium sentence tag you may want to put in your ~/.emacs something like (setq cg-sent-tag "\\bpunct\\b") (if your sentence tag was punct).

IRC

Do M-x erc to start the IRC client. See http://www.emacswiki.org/emacs/ErcBasics and http://emacs-fu.blogspot.com/2009/06/erc-emacs-irc-client.html for more info.

See also

Retrieved from "https://wiki.apertium.org/w/index.php?title=Emacs&oldid=52623"