Difference between revisions of "Hfst"

Latest revision as of 06:25, 27 May 2021

The IRC channel is #hfst at irc.oftc.net (you may try irc://irc.oftc.net/#hfst if your browser supports it, or enter #hfst into https://webchat.oftc.net/ if you want a web client). The HFST Wiki has some very good documentation (see especially the page HfstReadme when you run into compilation problems).

HFST is actually created as a set of wrappers over several possible back-ends, Foma, OpenFST, SFST, …. The latest versions of HFST include the back-ends you need, so there's no reason to install any of these backends separately.

⚠ WARNING ⚠

This page is out of date as a result of the migration to GitHub. Please update this page with new documentation and remove this warning. If you are unsure how to proceed, please contact the GitHub migration team.

Building and installing HFST[edit]

See Installation, for most real operating systems you can now get pre-built packages of HFST (as well as other core tools) through your regular package manager.

If you wish to hack on the HFST C++ code itself (or you are on some system that doesn't have packages yet), you can follow this procedure:

Install prerequisites[edit]

You will need the regular build dependencies:

automake, autoconf, libtool, flex, bison, g++, libreadline-dev

If you've already installed apertium/lttoolbox these should be installed already; if not, they should be easily installable with your package manager, e.g.

Ubuntu: sudo apt-get install automake autoconf libtool flex bison g++ libreadline-dev
Arch Linux: sudo pacman -S base-devel
MacOS X users should install the general Prerequisites_for_Mac_OS_X first, then sudo port install bison readline

Download HFST[edit]

Either use the latest release (recommended for users), or go with the bleeding-edge Git version (recommended for developers).

From Git repository[edit]

$ git clone https://github.com/hfst/hfst.git
$ cd hfst/
$ ./autogen.sh
$ ./configure
$ make

(The autogen step is only needed when using Git, not with the tarball.)

Released tarball[edit]

Download the latest release, named something like hfst-X.Y.Z.tar.gz, from https://github.com/hfst/hfst/releases, then

$ tar -xzf hfst-X.Y.Z.tgz
$ cd hfst-X.Y.Z/

(replacing X.Y.Z for the version you downloaded)

Configure[edit]

In the configure step, you can turn on/off features and backends and such. The OpenFST backend is included in the HFST distribution, while foma and SFST are not and are not recommended since they typically lead to more trouble than it's worth.

For most users, this should work:

$ ./configure --enable-proc --without-foma --enable-lexc --enable-all-tools

The above command will configure it to be installed to /usr/local in the make install step (below).

If you want hfst and back-ends installed somewhere else, you can do

$ ./configure --enable-proc --without-foma --enable-lexc --enable-all-tools  --prefix=/home/USERNAME/local/

Note: When we say USERNAME we mean your username, you need to replace it with your username, if you don't know what it is, you can find out by typing whoami

You can also add --with-unicode-handler=glib (or --with-unicode-handler=ICU) to the ./configure step if you have glib (or ICU) installed and want better Unicode Case_folding.

Compile and install[edit]

If your autotools version is older than 1.14 (check with automake --version), first do:

$ scripts/generate-cc-files.sh

Build by running

$ make

Then you need to install (Note: you need to use sudo make install if you installed it in /usr/local (or did not give a --prefix in the configure step); otherwise, no sudo!)

$ make install

And finally, unless you have a Mac, you may need to do:

$ sudo ldconfig

Troubleshooting[edit]

When doing "make" with old autotools (pre 1.14?)

make[5]: *** No rule to make target `xre_parse.hh', needed by `xre_lex.ll'.  Stop.

Run scripts/generate-cc-files.sh and then make again.

If, during the ./configure step, you see

checking for GNU libc compatible malloc... no
[…]
checking for GNU libc compatible realloc... no

and then during make a bunch of errors like:

/usr/local/include/sfst/mem.h:37:57: error: 'malloc' was not declared in this scope

, try the following:

sudo ldconfig
export LD_LIBRARY_PATH=/usr/local/lib
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig

and then ./configure and make.

If, during make, you see errors like

xre_parse.cc:2293:24: error: invalid conversion from 'const char*' to 'char*' [-fpermissive]

try instead

make CXXFLAGS=-fpermissive

If, when compiling a dictionary, you end up in a "foma" prompt where you can type stuff, you should remove anything related to foma or "hfst-xfst" from your system, and build HFST anew as described above.

For more advices on installation problems, have a look at the Hfst Readme page.

See also Foma, OpenFST and SFST for problems regarding the back-ends.

Using[edit]

$ svn co https://victorio.uit.no/langtech/trunk/langs/fao
$ cd fao/src
$ make -f Makefile.hfst

$ echo "orð" | hfst-lookup ../bin/fao-morph.hfst
lookup> 
orð	orð+N+Neu+Sg+Nom+Indef
orð	orð+N+Neu+Sg+Acc+Indef
orð	orð+N+Neu+Pl+Nom+Indef
orð	orð+N+Neu+Pl+Acc+Indef

lookup>
$

To compile lexc code, first concatenate all the lexc files:

$ cat fao-lex.txt noun-fao-lex.txt noun-fao-morph.txt adj-fao-lex.txt \
adj-fao-morph.txt verb-fao-lex.txt verb-fao-morph.txt adv-fao-lex.txt \
abbr-fao-lex.txt acro-fao-lex.txt pron-fao-lex.txt punct-fao-lex.txt \
numeral-fao-lex.txt pp-fao-lex.txt cc-fao-lex.txt cs-fao-lex.txt \
interj-fao-lex.txt det-fao-lex.txt > ../tmp/lexc-all.txt

To compile this, just use the hfst-lexc program,

hfst-lexc < ../tmp/lexc-all.txt > ../bin/lexc-fao.bin

To compile the twol rules, just use the hfst-twolc program,

$ hfst-twolc twol-fao.txt > twol-fao.bin

And then to compose the lexicon and rule file, use hfst-compose-intersect:

$ hfst-compose-intersect -l lexc-fao.bin twol-fao.bin -o fao-gen.hfst

This will create a generator, if you want an analyser, you just need to invert the generator with hfst-invert:

$ hfst-invert fao-gen.hfst -o fao-morph.hfst

External links[edit]

Helsinki Finite-State Transducer Technology (HFST)

@@ Line 1: / Line 1: @@
 {{TOCD}}
-'''hfst''' is the Helsinki finite-state toolkit. This is formalism-compatible with both lexc and twolc, so, kind of like [[foma]] is to xfst. It is currently being used in [[apertium-sme-nob]] and [[apertium-fin-sme]].
+'''hfst''' is the Helsinki finite-state toolkit. This is formalism-compatible with both lexc and twolc, so, kind of like [[foma]] is to xfst. It is currently being used in [[apertium-sme-nob]], [[apertium-fin-sme]], [[apertium-kaz-tat]] and in few other pairs which involve Turkic languages.
-The IRC channel is <code>#hfst</code> at <code>irc.freenode.net</code> (you may try [irc://irc.freenode.net/#hfst irc://irc.freenode.net/#hfst] if your browser supports it, or enter #hfst into http://webchat.freenode.net/ if you want a web client). The [https://kitwiki.csc.fi/twiki/bin/view/KitWiki/HfstHome HFST Wiki] has some very good documentation (see especially the page [https://kitwiki.csc.fi/twiki/bin/view/KitWiki/HfstReadme HfstReadme] when you run into compilation problems).
+The IRC channel is <code>#hfst</code> at <code>irc.oftc.net</code> (you may try [irc://irc.oftc.net/#hfst irc://irc.oftc.net/#hfst] if your browser supports it, or enter #hfst into https://webchat.oftc.net/ if you want a web client). The [https://kitwiki.csc.fi/twiki/bin/view/KitWiki/HfstHome HFST Wiki] has some very good documentation (see especially the page [https://kitwiki.csc.fi/twiki/bin/view/KitWiki/HfstReadme HfstReadme] when you run into compilation problems).
+HFST is actually created as a set of wrappers over several possible ''back-ends'', [[Foma]], [[OpenFST]], [[SFST]], …. The latest versions of HFST include the back-ends you need, so there's no reason to install any of these backends separately.
+{{Github-migration-check}}
+==Building and installing HFST==
+<span style="color: #f00;">See [[Installation]], for most real operating systems you can now get pre-built packages of HFST (as well as other core tools) through your regular package manager.</span>
-==Prerequisites==
-'''Required:'''
-* automake, autoconf, libtool
-* [[OpenFST]]
+If you wish to hack on the HFST C++ code itself (or you are on some system that doesn't have packages yet), you can follow this procedure:
-'''Semi-Optional Backends:'''
-* [[Foma]] -- used for lexc and xfst (sequential rewrite rules)
-** remember to pass <code>--enable-lexc --with-foma</code> to ./configure to use this
-** IF YOU PLAN ON COMPILING ANY LEXC FILES, THIS IS BASICALLY MANDATORY
+===Install prerequisites===
-'''Optional Backends:'''
-* [[SFST]] -- makes hfst-substitute a lot faster
-** remember to pass <code>--with-sfst</code> to ./configure to use this
+You will need the regular build dependencies:
-You can also use glib or ICU to handle Unicode operations (configure --with-unicode-handler={glib,ICU}).
+* <code>automake, autoconf, libtool, flex, bison, g++, libreadline-dev</code>
+If you've already installed apertium/lttoolbox these should be installed already; if not, they should be easily installable with your package manager, e.g.
-==Compiling HFST3==
+* Ubuntu: <code>sudo apt-get install automake autoconf libtool flex bison g++ libreadline-dev</code>
+* Arch Linux: <code>sudo pacman -S base-devel</code>
+* MacOS X users should install the general [[Prerequisites_for_Mac_OS_X]] first, then <code>sudo port install bison readline</code>
-===Subversion checkout===
+===Download HFST===
+Either use the latest release (recommended for users), or go with the bleeding-edge Git version (recommended for developers).
-:"MacOS X note: you need XCode installed on your Mac. It came with your computer, and can be downloaded from [http://developer.apple.com/ Apple] (registration required)"
+====From Git repository====
-First we need to checkout the code from the svn
 <pre>
-$ svn co https://hfst.svn.sourceforge.net/svnroot/hfst/trunk/hfst3
+$ git clone https://github.com/hfst/hfst.git
+$ cd hfst/
+$ ./autogen.sh
+$ ./configure
+$ make
 </pre>
-Next we need to change the directory to the downloaded one
+(The autogen step is only needed when using Git, not with the tarball.)
+====Released tarball====
+Download the latest release, named something like hfst-X.Y.Z.tar.gz, from https://github.com/hfst/hfst/releases, then
 <pre>
+$ tar -xzf hfst-X.Y.Z.tgz
-$ cd hfst3/
+$ cd hfst-X.Y.Z/
 </pre>
+(replacing X.Y.Z for the version you downloaded)
-And then run autoreconf -i
+===Configure===
+In the configure step, you can turn on/off features and backends and such. <small>The [[OpenFST]] backend is included in the HFST distribution, while [[foma]] and [[SFST]] are not and are not recommended since they typically lead to more trouble than it's worth.</small>
+For most users, this should work:
 <pre>
+$ ./configure --enable-proc --without-foma --enable-lexc --enable-all-tools
-$ autoreconf -i
 </pre>
-Now's the time to configure the package, this is done differently depending on which of the back ends you have installed earlier; If you've installed all of them use
+The above command will configure it to be installed to /usr/local in the <code>make install</code> step (below).
+If you want hfst and back-ends installed somewhere else, you can do
 <pre>
-$ ./configure --enable-lexc --with-foma --with-sfst --prefix=/home/USERNAME/local/
+$ ./configure --enable-proc --without-foma --enable-lexc --enable-all-tools  --prefix=/home/USERNAME/local/
 </pre>
-If you've only installed foma and openfst use
-<pre>
-$ ./configure --enable-lexc --with-foma  --prefix=/home/USERNAME/local/
-</pre>
-and if you've only installed sfst and openfst use
-<pre>
-$ ./configure --with-sfst  --prefix=/home/USERNAME/local/
-</pre>
-Note: If you want to install hfst in /usr/local, dump the --prefix at the end of the configure command
+'''Note: When we say USERNAME we mean your username, you need to replace it with your username, if you don't know what it is, you can find out by typing <code>whoami</code>'''
-Now for the easier part, you need to make the package by running
+You can also add <code>--with-unicode-handler=glib</code> (or <code>--with-unicode-handler=ICU</code>) to the ./configure step if you have glib (or ICU) installed and want better Unicode [https://en.wikipedia.org/wiki/Case_folding#Case_folding Case_folding].
+===Compile and install===
+If your autotools version is older than 1.14 (check with <code>automake --version</code>), first do:
+<pre>$ scripts/generate-cc-files.sh</pre>
+Build by running
 <pre>$ make</pre>
-then you need to install (Note: you need to add a sudo in front of the command if you installed it in /usr/local)
+Then you need to install (Note: you need to use <code>sudo make install</code> if you installed it in /usr/local (or did not give a --prefix in the configure step); otherwise, no sudo!)
 <pre>
 $ make install
-</pre>
-and finally (this might not be necessary on your Mac)
-<pre>
-$ sudo ldconfig
 </pre>
+And finally, unless you have a Mac, you may need to do:
-===Prepackaged tarball===
-Download the latest version from [http://sourceforge.net/projects/hfst/files/], and unzip. Then follow the instructions in the README file, i.e.:
 <pre>
-$ cd hfst-3.0/
-$ sh autogen.sh
-$ ./configure
-$ make
-$ sudo make install
 $ sudo ldconfig
 </pre>
 ==Troubleshooting==
+When doing "make" with old autotools (pre 1.14?)
+<pre>make[5]: *** No rule to make target `xre_parse.hh', needed by `xre_lex.ll'.  Stop.</pre>
+Run <code>scripts/generate-cc-files.sh</code> and then make again.
 If, during the ./configure step, you see<pre>checking for GNU libc compatible malloc... no
@@ Line 98: / Line 111: @@
 make CXXFLAGS=-fpermissive
 </pre>
+If, when compiling a dictionary, you end up in a "foma" prompt where you can type stuff, you should remove anything related to foma or "hfst-xfst" from your system, and build HFST anew as described above.
 For more advices on installation problems, have a look at [https://kitwiki.csc.fi/twiki/bin/view/KitWiki/HfstReadme the Hfst Readme page].
+See also [[Foma]], [[OpenFST]] and [[SFST]] for problems regarding the back-ends.
 ==Using==
 <pre>
-$ svn co https://victorio.uit.no/langtech/trunk/st/fao
+$ svn co https://victorio.uit.no/langtech/trunk/langs/fao
 $ cd fao/src
 $ make -f Makefile.hfst
@@ Line 154: / Line 172: @@
 $ hfst-invert fao-gen.hfst -o fao-morph.hfst
 </pre>
-==HFST2 vs HFST3==
-There have been some changes. Notably:
-* In twol files, a <code>/</code> in alphabetic symbols has to be escaped, e.g. <code>%+Der%/st</code> instead of <code>%+Der/st</code>.
-* In twol files, you can no longer have Sets on the left-hand side of a rule, so write <code>Vx:Vy /<= _ ; where Vx in Set1 Vy in Set2 ;</code> where you before would have <code>Set1:Set2 /<= _ ;</code>
-* The old <code>-r</code> option to hfst-twolc is now uppercase: <code>-R</code>
-* hfst-lookup-optimize is gone, use instead <code>hfst-fst2fst -O -i infile.hfst -o outfile.hfst.ol</code>
-* hfst-lexc needs the outfile option to be before the lexc (input), e.g. <code>hfst-lexc -o outfile.hfst mylexicon.lexc</code>
-* hfst-compose-intersect uses <code>-1</code> (number one) instead of <code>-l</code> (letter L), and <code>-2</code> for the rule-file. E.g. <code>hfst-compose-intersect -1 lexicon.hfst -2 rules.twol.hfst -o generator.hfst</code>
 ==See also==

Difference between revisions of "Hfst"

Latest revision as of 06:25, 27 May 2021

Contents

Building and installing HFST[edit]

Install prerequisites[edit]

Download HFST[edit]

From Git repository[edit]

Released tarball[edit]

Configure[edit]

Compile and install[edit]

Troubleshooting[edit]

Using[edit]

See also[edit]

External links[edit]

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools