Starting a new language with lttoolbox

For information on how to install lttoolbox, see lttoolbox and minimal installation from SVN

This page is going to describe how to start a new language with lttoolbox. As lttoolbox is not really suited to agglutinative languages, or languages with complex and regular morphophonology (or at least no-one has written a dictionary from scratch using lttoolbox for one of these languages yet), we're going to work on one with simpler and less regular morphology. We particularly encourage people to use lttoolbox wherever possible; it has a straightforward syntax, has some very useful features for validation and is a canonical part of Apertium, not requiring any special software to be installed.

Preliminaries

A morphological transducer in lttoolbox has typically one file, a .dix file. This defines both how morphemes in the language are joined together, morphotactics, and how changes happen when these morphemes are joined together, morphographemics (or morphophonology). For example,

• Morphotactics: wolf<n><pl> → wolf + s
• Morphographemics: wolf + s → wolves

These two phenomena are treated in the same file.

The language

The language we will be modelling is Upper Sorbian, a Slavic language spoken in Germany. There is a limited grammar available in English here, and that is what we will be basing our analysis on. The part of speech we're going to look at for this small tutorial is nouns. Nouns in Upper Sorbian have seven cases (nominative, genitive, dative, accusative, locative, instrumental, vocative), three numbers (singular, dual, plural) and three genders (masculine, feminine, neuter). Like other Slavic languages, the category of animacy is distinguished in the masculine.

Paradigms

Here we give four example paradigms; these will form the basis of our implementation.

Masculine animate (nan "father")

	Singular	Dual	Plural
Nominative	nan	nanaj	nanojo
Genitive	nana	nanow	nanow
Dative	nanej	nanomaj	nanam
Accusative	nana	nanow	nanow
Instrumental	nanom	nanomaj	nanami
Locative	nanje	nanomaj	nanach
Vocative	nano!	nanaj!	nanojo!

Masculine inanimate (hrěch "sin")

The differences from the masculine animate paradigm are indicated in blue.

	Singular	Dual	Plural
Nominative	hrěch	hrěchaj	hrěchi
Genitive	hrěcha	hrěchow	hrěchow
Dative	hrěchej	hrěchomaj	hrěcham
Accusative	hrěch	hrěchaj	hrěchi
Instrumental	hrěchom	hrěchomaj	hrěchami
Locative	hrěchu	hrěchomaj	hrěchach
Vocative	hrěcho!	hrěchaj!	hrěchi!

Feminine (wróna "crow")

The parts in common with the masculine paradigms are highlighted in green.

	Singular	Dual	Plural
Nominative	wróna	wrónje	wróny
Genitive	wrónu	wrónow	wrónow
Dative	wrónje	wrónomaj	wrónam
Accusative	wrónu	wrónje	wróny
Instrumental	wrónu	wrónomaj	wrónami
Locative	wrónje	wrónomaj	wrónach
Vocative	wróna!	wrónje!	wrónu!

Neuter (trašidło "monster")

Forms in common with both the masculine and feminine paradigms are highlighted in red.

	Singular	Dual	Plural
Nominative	trašidło	trašidłe	trašidła
Genitive	trašidła	trašidłow	trašidłow
Dative	trašidłu	trašidłomaj	trašidłam
Accusative	trašidło	trašidłe	trašidła
Instrumental	trašidłom	trašidłomaj	trašidłami
Locative	trašidłe	trašidłomaj	trašidłach
Vocative	trašidło!	trašidłe!	trašidła!

Lexicon

Given the description above, how do we start to write a morphological description in lttoolbox? Well, first we start with our filename, hsb.dix, so open up a text editor and save an empty document with that name.

The basics

The skeleton

The basic skeleton of an lttoolbox dictionary looks like the following:

<dictionary>
  <alphabet>abc...</alphabet>
  <sdefs>
    ...
  </sdefs>
  <pardefs>
    ...
  </pardefs>
  <section id="main" type="standard">
    ...
  </section>
</dictionary>

So type this up into the file, and this gives the outline of our the main parts of our morphology: the alphabet (used for tokenisation); the symbols (or tags), which give us useful mnemonics for grammatical features; the <pardefs> section, which gives our inflectional paradigms; and finally the main section of the file, which contains our lexical items.

Symbol (tag) definitions

The first thing we'll start with is the list of symbols which are going to encode our grammatical features (part-of-speech, gender, number, case). The page list of symbols gives some common tags in Apertium. Generally we try and keep features which are named the same thing among languages tagged the same; thus, for example, the tag for "nominative" will be <nom>, regardless of if we are talking about Romanian, Serbo-Croatian, Icelandic or Albanian. Symbols are defined in the <sdefs> section with <sdef> elements.

<sdefs>
  <sdef n="n"     c="Noun"/>

  <sdef n="ma"    c="Masculine (animate)"/>
  <sdef n="mi"    c="Masculine (inanimate)"/>
  <sdef n="nt"    c="Neuter"/>
  <sdef n="f"     c="Feminine"/>

  <sdef n="sg"    c="Singular"/>
  <sdef n="du"    c="Dual"/>
  <sdef n="pl"    c="Plural"/>

  <sdef n="nom"   c="Nominative"/>
  <sdef n="gen"   c="Genitive"/>
  <sdef n="dat"   c="Dative"/>
  <sdef n="acc"   c="Accusative"/>
  <sdef n="ins"   c="Instrumental"/>
  <sdef n="loc"   c="Locative"/>
  <sdef n="voc"   c="Vocative"/>
</sdefs>

The c after each symbol definition stands for comment and is optional but quite convenient if you have a lot of tags and want a quick reference to what they mean.

Our first paradigm

After we've defined our symbols, then the next thing to do is to write our first paradigm. We'll start with the paradigm for nan "father". There is a convention in Apertium that each major paradigm identifier is made up of at least the name of an exemplar word and its part of speech. In this case we will also add the gender.

A paradigm is made up of a series of entries. Each entry has a pair (<p>), which in turn has a left side (<l>) and a right side (<r>). Normally, the surface form is found on the left and the lexical form on the right.

We can use the symbols we defined earlier with <sdef> tags by calling them with the <s> element.

<pardefs>
  <pardef n="nan__n_ma">
    <e><p><l></l><r><s n="n"/><s n="ma"/><s n="sg"/><s n="nom"/></r></p></e>
    <e><p><l>a</l><r><s n="n"/><s n="ma"/><s n="sg"/><s n="gen"/></r></p></e>
    <e><p><l>ej</l><r><s n="n"/><s n="ma"/><s n="sg"/><s n="dat"/></r></p></e>
    <e><p><l>a</l><r><s n="n"/><s n="ma"/><s n="sg"/><s n="acc"/></r></p></e>
    <e><p><l>om</l><r><s n="n"/><s n="ma"/><s n="sg"/><s n="ins"/></r></p></e>
    <e><p><l>je</l><r><s n="n"/><s n="ma"/><s n="sg"/><s n="loc"/></r></p></e>
    <e><p><l>o</l><r><s n="n"/><s n="ma"/><s n="sg"/><s n="voc"/></r></p></e>

    <e><p><l>aj</l><r><s n="n"/><s n="ma"/><s n="du"/><s n="nom"/></r></p></e>
    <e><p><l>ow</l><r><s n="n"/><s n="ma"/><s n="du"/><s n="gen"/></r></p></e>
    <e><p><l>omaj</l><r><s n="n"/><s n="ma"/><s n="du"/><s n="dat"/></r></p></e>
    <e><p><l>ow</l><r><s n="n"/><s n="ma"/><s n="du"/><s n="acc"/></r></p></e>
    <e><p><l>omaj</l><r><s n="n"/><s n="ma"/><s n="du"/><s n="ins"/></r></p></e>
    <e><p><l>omaj</l><r><s n="n"/><s n="ma"/><s n="du"/><s n="loc"/></r></p></e>
    <e><p><l>aj</l><r><s n="n"/><s n="ma"/><s n="du"/><s n="voc"/></r></p></e>

    <e><p><l>ojo</l><r><s n="n"/><s n="ma"/><s n="pl"/><s n="nom"/></r></p></e>
    <e><p><l>ow</l><r><s n="n"/><s n="ma"/><s n="pl"/><s n="gen"/></r></p></e>
    <e><p><l>am</l><r><s n="n"/><s n="ma"/><s n="pl"/><s n="dat"/></r></p></e>
    <e><p><l>ow</l><r><s n="n"/><s n="ma"/><s n="pl"/><s n="acc"/></r></p></e>
    <e><p><l>ami</l><r><s n="n"/><s n="ma"/><s n="pl"/><s n="ins"/></r></p></e>
    <e><p><l>ach</l><r><s n="n"/><s n="ma"/><s n="pl"/><s n="loc"/></r></p></e>
    <e><p><l>ojo</l><r><s n="n"/><s n="ma"/><s n="pl"/><s n="voc"/></r></p></e>
  </pardef>
</pardefs>

Using the paradigm

Now that we've defined a paradigm, we can add a word that uses it. The obvious choice is "nan", being as that is the name of the paradigm.

  <section id="main" type="standard">
    <e lm="nan"><i>nan</i><par n="nan__n_ma"/></e>    
  </section>

The <e> element is the same as in the paradigm, but in the case of lexical entries (as opposed to morphological entries), it commonly contains the attribute lm "lemma". The <i> tag stands for "invariant" and means that the left side is the same as the right side.

So by this point we should have a whole dictionary with a single word in it. Save the file.

Compiling

Once you've saved the file, you can go to the command line and try to validate it. Presuming that the file is called hsb.dix, then the following will check it against the definition:

$ apertium-validate-dictionary hsb.dix 

If the dictionary is valid, you should get no output.

This is a major benefit over related software (e.g. HFST). If you leave out a symbol definition, then you will get an angry message from the validation script, such as the following:

$ apertium-validate-dictionary hsb.dix 
hsb.dix:25: element s: validity error : IDREF attribute n references an unknown ID "nom"
hsb.dix:33: element s: validity error : IDREF attribute n references an unknown ID "nom"
hsb.dix:41: element s: validity error : IDREF attribute n references an unknown ID "nom"
Document hsb.dix does not validate against /home/fran/local/share/apertium/dix.dtd

In this case, it's best to go back and check that all your symbols are defined.

Assuming that our dictionary is valid, we can move to the next step and compile it.

$ lt-comp lr hsb.dix hsb-mor.bin
main@standard 29 45

$ lt-comp rl hsb.dix hsb-gen.bin
main@standard 29 45

The lr and rl in the compilation command stand for "left to right" and "right to left", respectively. Presuming that we have our surface form on the left and our lexical form on the right, compiling lr will make a morphological analyser, and compiling rl will make a generator.

Usage

See also: lttoolbox

We can then test them both as follows:

$ echo "nanow" | lt-proc hsb-mor.bin 
^nanow/nan<n><ma><du><gen>/nan<n><ma><du><acc>/nan<n><ma><pl><gen>/nan<n><ma><pl><acc>$

$ echo "^nan<n><ma><pl><gen>$" | lt-proc -g hsb-gen.bin 
nanow

To get a full listing of the dictionary, the command lt-expand can be used:

$ lt-expand hsb.dix 
nan:nan<n><ma><sg><nom>
nana:nan<n><ma><sg><gen>
nanej:nan<n><ma><sg><dat>
nana:nan<n><ma><sg><acc>
nanom:nan<n><ma><sg><ins>
nanje:nan<n><ma><sg><loc>
nano:nan<n><ma><sg><voc>
nanaj:nan<n><ma><du><nom>
nanow:nan<n><ma><du><gen>
...

We've got everything in place for building the dictionary. Now on to our next word.

Organising paradigms

The obvious thing to do when adding the word hrěch "sin" would be to duplicate the nan__n_ma paradigm but change the gender and the surface forms, which are different. Then we would end up with a new paradigm, something like:

  <pardef n="hrěch__n_mi">
    <e><p><l></l><r><s n="n"/><s n="mi"/><s n="sg"/><s n="nom"/></r></p></e>
    <e><p><l>a</l><r><s n="n"/><s n="mi"/><s n="sg"/><s n="gen"/></r></p></e>
    <e><p><l>ej</l><r><s n="n"/><s n="mi"/><s n="sg"/><s n="dat"/></r></p></e>
    <e><p><l></l><r><s n="n"/><s n="mi"/><s n="sg"/><s n="acc"/></r></p></e>
    <e><p><l>om</l><r><s n="n"/><s n="mi"/><s n="sg"/><s n="ins"/></r></p></e>
    <e><p><l>u</l><r><s n="n"/><s n="mi"/><s n="sg"/><s n="loc"/></r></p></e>
    <e><p><l>o</l><r><s n="n"/><s n="mi"/><s n="sg"/><s n="voc"/></r></p></e>

    <e><p><l>aj</l><r><s n="n"/><s n="mi"/><s n="du"/><s n="nom"/></r></p></e>
    <e><p><l>ow</l><r><s n="n"/><s n="mi"/><s n="du"/><s n="gen"/></r></p></e>
    <e><p><l>omaj</l><r><s n="n"/><s n="mi"/><s n="du"/><s n="dat"/></r></p></e>
    <e><p><l>oj</l><r><s n="n"/><s n="mi"/><s n="du"/><s n="acc"/></r></p></e>
    <e><p><l>omaj</l><r><s n="n"/><s n="mi"/><s n="du"/><s n="ins"/></r></p></e>
    <e><p><l>omaj</l><r><s n="n"/><s n="mi"/><s n="du"/><s n="loc"/></r></p></e>
    <e><p><l>aj</l><r><s n="n"/><s n="mi"/><s n="du"/><s n="voc"/></r></p></e>

    <e><p><l>i</l><r><s n="n"/><s n="mi"/><s n="pl"/><s n="nom"/></r></p></e>
    <e><p><l>ow</l><r><s n="n"/><s n="mi"/><s n="pl"/><s n="gen"/></r></p></e>
    <e><p><l>am</l><r><s n="n"/><s n="mi"/><s n="pl"/><s n="dat"/></r></p></e>
    <e><p><l>i</l><r><s n="n"/><s n="mi"/><s n="pl"/><s n="acc"/></r></p></e>
    <e><p><l>ami</l><r><s n="n"/><s n="mi"/><s n="pl"/><s n="ins"/></r></p></e>
    <e><p><l>ach</l><r><s n="n"/><s n="mi"/><s n="pl"/><s n="loc"/></r></p></e>
    <e><p><l>i</l><r><s n="n"/><s n="mi"/><s n="pl"/><s n="voc"/></r></p></e>
  </pardef>

We add an entry in the main section:

    <e lm="hrěch"><i>hrěch</i><par n="hrěch__n_mi"/></e>    

All is fine, and it's a good place to start, but if we look at the tables above, the paradigm for nan and the paradigm for hrěch share many suffixes. We can call paradigms from other paradigms, so why should we duplicate them?

As an alternative, the first thing we do is to split out the common suffixes into a separate paradigm. Let's call it common__m (for common masculine suffixes).

  <pardef n="common__m">
    <e><p><l></l><r><s n="sg"/><s n="nom"/></r></p></e>
    <e><p><l>a</l><r><s n="sg"/><s n="gen"/></r></p></e>
    <e><p><l>ej</l><r><s n="sg"/><s n="dat"/></r></p></e>
    <e><p><l>om</l><r><s n="sg"/><s n="ins"/></r></p></e>
    <e><p><l>o</l><r><s n="sg"/><s n="voc"/></r></p></e>

    <e><p><l>aj</l><r><s n="du"/><s n="nom"/></r></p></e>
    <e><p><l>ow</l><r><s n="du"/><s n="gen"/></r></p></e>
    <e><p><l>omaj</l><r><s n="du"/><s n="dat"/></r></p></e>
    <e><p><l>omaj</l><r><s n="du"/><s n="ins"/></r></p></e>
    <e><p><l>omaj</l><r><s n="du"/><s n="loc"/></r></p></e>

    <e><p><l>aj</l><r><s n="du"/><s n="voc"/></r></p></e>
    <e><p><l>ow</l><r><s n="pl"/><s n="gen"/></r></p></e>
    <e><p><l>am</l><r><s n="pl"/><s n="dat"/></r></p></e>
    <e><p><l>ami</l><r><s n="pl"/><s n="ins"/></r></p></e>
    <e><p><l>ach</l><r><s n="pl"/><s n="loc"/></r></p></e>
  </pardef>

(Note: We don't include the part of speech or gender, as that is different depending on the lemma.)

Now with this "common" paradigm available, we can simplify both the nan__n_ma and hrěch__n_mi paradigms, thusly:

  <pardef n="nan__n_ma">
    <e><p><l></l><r><s n="n"/><s n="ma"/></r></p><par n="common__m"/></e>
    <e><p><l>a</l><r><s n="n"/><s n="ma"/><s n="sg"/><s n="acc"/></r></p></e>
    <e><p><l>je</l><r><s n="n"/><s n="ma"/><s n="sg"/><s n="loc"/></r></p></e>

    <e><p><l>ow</l><r><s n="n"/><s n="ma"/><s n="du"/><s n="acc"/></r></p></e>

    <e><p><l>ojo</l><r><s n="n"/><s n="ma"/><s n="pl"/><s n="nom"/></r></p></e>
    <e><p><l>ow</l><r><s n="n"/><s n="ma"/><s n="pl"/><s n="acc"/></r></p></e>
    <e><p><l>ojo</l><r><s n="n"/><s n="ma"/><s n="pl"/><s n="voc"/></r></p></e>
  </pardef>

  <pardef n="hrěch__n_mi">
    <e><p><l></l><r><s n="n"/><s n="mi"/></r></p><par n="common__m"/></e>
    <e><p><l></l><r><s n="n"/><s n="mi"/><s n="sg"/><s n="acc"/></r></p></e>
    <e><p><l>u</l><r><s n="n"/><s n="mi"/><s n="sg"/><s n="loc"/></r></p></e>

    <e><p><l>oj</l><r><s n="n"/><s n="mi"/><s n="du"/><s n="acc"/></r></p></e>

    <e><p><l>i</l><r><s n="n"/><s n="mi"/><s n="pl"/><s n="nom"/></r></p></e>
    <e><p><l>i</l><r><s n="n"/><s n="mi"/><s n="pl"/><s n="acc"/></r></p></e>
    <e><p><l>i</l><r><s n="n"/><s n="mi"/><s n="pl"/><s n="voc"/></r></p></e>
  </pardef>

Factoring out common suffixes makes paradigms more maintainable but also more complicated to understand. The features of the language, the depth of the description and the intuitions of the person writing the dictionary will dictate to what extent parts can be factored out in this way.

Now try and add the other two words to the dictionary, along with their inflectional paradigms. A solution can be found on the talk page.

You can also try adding the alternative forms (for example hrěchu as a possible genitive singular of hrěch).

See also

• Monodix basics
• Starting a new language with HFST